You are here

Insulating tanks, pipes and radiators

Lagging water tanks and pipes and insulating behind radiators reduces the amount of heat lost, so you spend less money heating water up, and hot water stays hotter for longer. 

How much could you save?

Insulating your hot water cylinder is one of the easiest ways to save energy and, therefore, money. If you already have a jacket fitted around your tank, check the thickness. It should be at least 75mm thick; if it isn’t, consider buying a new one. Fitting a British Standard jacket around your cylinder will cut heat loss by more than 75 per cent and could save you around £20-£35 a year, which is more than the cost of the jacket.

By slipping pipe insulation around your exposed hot water pipes you’ll keep your hot water hotter for longer. Fitting insulation to pipes is easy if the pipes are accessible; if your pipes are hard to reach, you may need to engage a professional.

Save by insulating your hot water tank and pipes:

England, Scotland and Wales 

 

Annual saving

DIY cost

Time taken to pay for itself

Carbon dioxide saving per year

Hot water tank top up insulation (25 to 80mm)

Around £20-£35

Around £15

Around six months

Around 90kg -120kg

Hot water tank jacket on an uninsulated tank

Around £85-£130

Around £15

Less than six months

Around 400kg - 570kg

Primary pipe insulation

Around £10

Around £20

2 years

Around 45kg

Savings based on a typical gas-heated home.

Northern Ireland

Annual saving

DIY cost

Time taken to pay for itself

Carbon dioxide saving per year

Hot water tank top up insulation (25 to 80mm) Around £35 - £40 Around £15 Less than six months Around 120kg - 150kg
Hot water tank jacket on an uninsulated tank Around £145 - £170 Around £15 Less than six months Around 550kg - 650kg
Primary pipe insulation Around £15 Around £10 Around a year Around 55kg

Savings based on a typical oil-heated three semi-detached home.

Insulating a hot water tank

A hot water cylinder jacket costs about £15, and fitting it is a straightforward job if you follow the manufacturer’s instructions.

Pipe insulation consists of a foam tube that covers the exposed pipes between your hot water cylinder and boiler, reducing the amount of heat lost and, therefore, keeping your water hotter for longer. It's usually as simple as choosing the correct size from a DIY store and then slipping it around the pipes.

Radiator reflector panels

If you’re trying to save money on your heating bills and reduce your energy consumption, radiator reflector panels are an attractive low-cost option. Fixed behind your radiators, they reflect heat from the radiator back into the room, instead of letting the heat out through an external wall. They can produce the most benefit when installed on uninsulated walls.